Project Description

  • Voltage Range: 15 to 28 Volts DC Peak
  • Standby Current: 650 μA @ 24 VDC (one communication every 5 seconds with LED blink enabled)
  • LED Current: 5 mA @ 24 VDC
  • Installation Temperatures: 14°F to 122°F (-10°C to50°C)
  • Operating Humidity Range: 10% to 93% Relative Humidity Non-condensing
The detector is intelligent sensors that utilize a state- of-the-art thermistor sensing circuit for fast response. These sensors are designed to provide open area protection with 50 foot spacing capability. The detector is a rate-of-rise temperature sensor with 135°F fixed temperature alarm. Inside MCU’s EEPROM keep the sensor’s address that can be set by a portable Address setting device. Two LEDs on each sensor light to provide 360° visibility of the sensor indication. The LEDs can be latched ON by code command from the panel for an alarm indication. The LEDs can also be unlatched to the normal condition by code command. The detector requires compatible addressable communications to function properly. Connect these sensors to listed-compatible control panels only.